When installing The etrailer hitch # e98854 onto your 2016 Chrysler Town and Country it uses the existing M10 and M12 bolts that should be present on your vehicle. Since your hardware is missing you will need to contact your vehicle's dealership to get the correct hardware. If you buy standard hardware from a hardware store it will take away the warranty of your trailer hitch. The etrailer hitch in my opinion is the best hitch that we offer for your Chrysler Town and Country because it... view full answer...
To convert your 4-Way trailer connector you will need the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, which includes everything needed to upgrade your trailer connector to a 7-Way RV connection. We have detailed installation instructions for you to review, see link.
The one other thing you will need is a No-Drill Mount Bracket, # C57202 (long) , to attach the connector to the hitch. You will bolt the bracket included in the # ETBC7 wiring kit to this bracket and then attach... view full answer...
Just about everything you need is available in one kit. Take a look at the 4 and 7-Way installation kit # ETBC7. This kit provides a 7-Way (the existing 4-Way will just plug into the 4-Way receptacle on the adapter) and it comes with all the wiring and circuit breakers you will need to wire in the brake controller.
The only other parts you will need are a circuit tester like # PTW2992, and, if your brake controller doesn't have a wiring adapter, you will need # 20127 (for Tekonsha or... view full answer...
To install the Prodigy P2 # 90885 brake controller in your 2016 Chrysler Town and Country with 4-way harness # C57186 there is only one other thing you'd need, the Universal Installation Kit for Trailer Brake Controller # ETBC7.
This kit will give you the rest of the necessary parts required to install the P2 - wiring, circuit breakers, hardware, as well as a 4-way to 7-way adapter. The only other thing I recommend is part # 10-2-1, which is 10 gauge wire by the foot for longer vehicles... view full answer...
Thanks for that photo, which shows you do have a 4-way like Wiring Harness # C56331 on your 2014 Chrysler Town and Country and we have exactly what you need in order to add a brake controller.
You will simply need to add the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7-way connector, circuit breakers and the rest of the hardware needed to install a brake controller. The 7-way will power your trailer's electric brakes as well as its lights.
For... view full answer...
If you are loading the scooter in the back of your 2015 Chrysler Town and Country I feel like you will only need a Ramp # EM07441 to load your Scooter. This will not require any installation, only unfold the ramp when you need to load and unload the scooter.
If you are going to have a Trailer Hitch Receiver # e98854 you can find a local installer by using the "Locate installers near me" link located under the pictures and install videos on the product page. This will give you a list of... view full answer...
Thank you for providing the bearing numbers and other part numbers from the repair parts manual for your 1999 Coleman Grand Touring Series Santa Fe 3389 Pop-Up camper. Based on the bearings and bolt pattern for your existing idler hubs, we can determine the correct parts to add electric brakes to your trailer.
The components needed to add electric brakes to a trailer are an electric brake compatible hub and drum, brake assemblies, a brake mounting flange, trailer wiring, a breakaway kit,... view full answer...
All you will need to adapt your Yakima Raptor bike rack to the crossbars on your 2013 Chrysler Town and Country are the universal MightyMounts, # Y03590. I have linked a video review of these for you. view full answer...
To make sure that you get the correct parts, I would need to know the inner and outer bearing numbers stamped into the metal of the bearings.
There are different 5 lug bolt patterns. Use the FAQ I have linked to measure for bolt pattern so you can get the correct hub and drum assemblies. If you do not have EZ Lube axles, you will not need EZ lube hub and drum assemblies.
If you do have L44649 inner and outer bearings and the seal has a 1.987 outer diameter and 1.5 inch inner diameter,... view full answer...
We have just about everything you are going to need packaged in one kit. Take a look at the 4 and 7-Way installation kit # ETBC7. This kit is going to provide a 7-Way (the existing 4-Way will just plug into the 4-Way receptacle on the adapter) and it comes with all the wiring and circuit breakers you will need to wire in the brake controller.
The only other parts you will need are a circuit tester like # PTW2993 unless you already have one, the wiring harness for the controller, # 20127,... view full answer...
If your 2016 Chrysler Town and Country already has a 4-pole flat trailer connector installed (at the factory or by the dealer) then installation of the Prodigy P2 Brake Controller # 90885 will require only the # ETBC7 installation kit along with the controller. The linked video shows the complete install process in a similar vehicle and references the air bag at the 17:45 mark. An install article for the kit is linked as well. view full answer...
I recommend using the Curt # 13389 because of the quality of the powder coat on the Curt hitches compared to some of the other available hitches. This is a Class III hitch with a 2" receiver and is a confirmed fit on the 2007 Chrysler Town and Country models with the Stow-N-Go seats.
If you're going to be towing a small trailer with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For a wiring harness I recommend using the Tekonsha T-One # 118300 because of the... view full answer...
According to my research your 2000 Chrysler Town and Country can be flat towed with all 4 wheels on the ground as long as you use a transmission lube pump from Remco Industries. We sell everything else you would need except for the lube pump.
First you will need base plates # 242-2. Then, for a compatible tow bar, you can use the Falcon 2 # RM-520. I have linked a video of this tow bar for you. You will also need safety cables # RM-643. The coiled design helps keep them off of the ground.
For... view full answer...
Flat towing a vehicle behind a motor home requires five basic components that are outlined in the linked article: tow bar, wiring/lighting kit, safety cables, base plates on the towed car and a supplementary braking system.
Some vehicles are flat-towable without much preparation but others will require you to go through specific steps (detailed in the car owner's manual) to make them ready for flat towing. Some cars may need a transmission lube pump or driveline disconnect. I checked for... view full answer...
You can't go wrong with either of the brake controllers you mentioned. The main difference between the controllers is how user-friendly the display is. The Prodigy # 90885 P2 uses an digital display that will display error codes in the event of any problems with the trailer's braking system. The Prodigy # 90195 P3 has a more user friendly display, which will actually spell out any problems, rather than an error code that you'll need to go look up.
To install the brake controller, you'll... view full answer...
Thank you for you support of etrailer.com!
Since you already have the Curt wiring harness installed on your 2011 Chrysler Town and Country, to set your vehicle up to control your trailer's electric brakes you will only need a trailer brake controller, like the Tekonsha Prodigy P3 # 90195 that you referenced, and the Universal Installation Kit for Trailer Brake Controller # ETBC7.
The Installation Kit # ETBC7 includes a 7-Way and 4-Way vehicle-side trailer connector that will allow you... view full answer...
Those are some extremely old tires. We recommend changing them every 6 years or so regardless of tread wear.
The metric size for your 20.5 x 8 - 10 tires is 205/65-10. Our most popular tire in this size is # AM1HP54. It has a load range D and max capacity of 1,330 pounds at 70 psi.
If you'd like a higher rated tire we have # AM1HP56 with an E load range rated for 1,650 pounds at 90 psi.
Both tires have a 2-year limited warranty. view full answer...
To tow a trailer with your 2015 Chrysler Town and Country I recommend the Curt T-Connector Vehicle Wiring Harness # C56331. It's a 4-way wiring connector to power the trailer's lights and it plugs in behind the van's tail lights. You also need to run a hot wire from the harness to the van's battery and insert the included fuse. I've linked the install details and a video from when we installed it.
If you also need a trailer hitch reciver I recommend the Draw-Tite, part # 75579, that's... view full answer...
Go To Results